My Cart

Close
Enjoy The Free Ground Shipping On All Orders Over $100

Rockford Fosgate

Rockford Fosgate Punch P1000X2

$599.99

Rockford Fosgate Punch P1000X2

Punch 1,000 Watt 2-Channel Amplifier

 

The Punch P1000X2 is a 2-channel stereo amplifier capable of producing 500 Watts into each channel at 2-Ohms. The P1000X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.

  • High level input capable with Auto Turn-On circuit
  • RCA pass-thru outputs
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection

The P1000X2 is an excellent way to PUNCH up your sound system without monopolizing your entire trunk - that way you have more room for subs! With its massive output stage, this amplifier is best suited for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Remember to utilize the recommended power and speaker cables to optimize power delivery.

CEA-2006 Compliant:  CEA-2006 Power Rating
300W x 2 @ 4Ω
≤1.0% THD+N
Number of Channels: 2
Rated Power 
(RMS Continuous Power):
300 Watts x 2 @ 4-Ohm 
500 Watts x 2 @ 2-Ohm 
1000 Watts x 1 @ 4-Ohm Bridged
Total Power 
(Sum of Rated Power):
1000 Watts RMS
Dynamic Power 
(PVC/PowerCube®):
401 Watts x 2 @ 4-Ohms 0° Res 
656 Watts x 2 @ 2-Ohms 0° Res
Bridgeable: Yes
Frequency Response: 20Hz to 20kHz +/- 1.0dB
Efficiency (average): 69% @ 4-Ohm 
64% @ 2-Ohm
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% 
2-Ohm: <1.0%
Signal-to-Noise (CEA): >85 dB
Channel Separation: >50 dB
Common Mode Rejection: >55 dB
Damping Factor: >500
Crossover Controls: High-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave Butterworth
Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or 
Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz 
Function depends upon LP/AP/HP switch position
Input Sensitivity: 150 mV - 12 V
Signal Input: Hi/Low level: 1 RCA pair
Signal Output: Low level: 1 RCA pair
Power Input Connector: Captive C-Clamp
Power Wire Gauge: 4 AWG
Speaker Output Connector: Captive C-Clamp
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Punch Level Control (PLC2) Ready
Visual Indicators: Power/Protect/Thermal LED 
Input Clip LED3 
Output Clip LED1,2,3 

LED Color Legend: 
1BLUE: <0.5% THD 
2VIOLET: 1% THD 
3RED: 10%+ THD
Circuit Topology Class: Class A/B
Operating Voltage: 9 - 16 VDC
Recommended Fuse 
(not included):
140 A
Max. Current Draw (13.8V Sinewave): 140 A
Average Current Draw (13.8V Music): 70 A
Suggested Alternator: 100 A
Shipping Weight: 15 Lbs. (6.80 Kg.)
Dimensions (H x W x D): 2.38 x 7.76 x 15.03 (in) 
6.05 x 19.71 x 38.18 (cm)
Dimensional Diagram: Rockford Fosgate Punch P1000X2

Join our Mailing List

Sign up to receive our daily email and get 50% off your first purchase.

My Cart

Subtotal: $0.00

Your cart is currently empty.