My Cart

Close
Enjoy The Free Ground Shipping On All Orders Over $100

Rockford Fosgate

Rockford Fosgate Punch P300X2

$249.99

Rockford Fosgate Punch P300X2

Punch 300 Watt 2-Channel Amplifier

 

The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers.

  • High level input capable with Auto Turn-On circuit
  • RCA pass-thru outputs
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection

    The P300X2 is a solid choice if you’re looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the P300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.

    CEA-2006 Compliant:

    CEA-2006 Power Rating
    100W x 2 @ 4Ω
    ≤1.0% THD+N

    Number of Channels: 2
    Rated Power 
    (RMS Continuous Power):
    100 Watts x 2 @ 4-Ohm 
    150 Watts x 2 @ 2-Ohm 
    300 Watts x 1 @ 4-Ohm Bridged
    Total Power 
    (Sum of Rated Power):
    300 Watts
    Dynamic Power 
    (PVC/PowerCube®):
    120 Watts x 2 @ 4-Ohms 0° Res 
    203 Watts x 2 @ 2-Ohms 0° Res
    Bridgeable: Yes
    Frequency Response: 20Hz-20kHz
    Efficiency (average): 69% @ 4-Ohm
    Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% 
    2-Ohm: <1.0%
    Signal-to-Noise (CEA): >85 dB
    Channel Separation: >50 dB
    Common Mode Rejection: >55 dB
    Damping Factor: >500
    Crossover Controls:

     High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth 

    Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth 
    All-Pass: Yes

    Tone Controls: 0dB to +14dB @ 12.5kHz 
    0dB to +18dB @ 45Hz
    Input Sensitivity: 150 mV - 12 V
    Signal Input: Hi/Low Level: 1 RCA Pair
    Signal Output: Low Level: 1 RCA Pair
    Power Input Connector: Captive C-Clamp
    Power Wire Gauge: 8 AWG to 4 AWG
    Speaker Output Connector: Captive C-Clamp
    Speaker Wire Gauge: 8 AWG to 18 AWG
    Heat Sink Type: Die Cast Aluminum
    Cooling: Convection
    Remote Controls: Optional Punch Level Control (PLC2) Ready
    Visual Indicators:

     Power/Protect/Thermal LED 

    Input Clip LED3 
    Output Clip LED1,2,3 

    LED Color Legend:
    1BLUE: <0.5% THD 
    2VIOLET: 1% THD 
    3RED: 10%+ THD

    Circuit Topology Class: Class A/B
    Operating Voltage: 9 - 16 VDC
    Recommended Fuse 
    (not included):
    50 A
    Max. Current Draw (13.8V Sinewave): 45 A
    Average Current Draw (13.8V Music): 23 A
    Suggested Alternator: 75 A
    Shipping Weight: 9.5 Lbs. (4.3 Kg.)
    Dimensions (H x W x D): 2.38 x 7.76 x 9.86 (in) 
    6.05 x 19.71 x 25.04 (cm)
    Dimensional Diagram:  Punch P300X2

    Join our Mailing List

    Sign up to receive our daily email and get 50% off your first purchase.

    My Cart

    Subtotal: $0.00

    Your cart is currently empty.