Rockford Fosgate
Rockford Fosgate Punch P600X4
$449.99
Rockford Fosgate Punch P600X4
Punch 600 Watt 4-Channel Amplifier
he Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.
| CEA-2006 Compliant: |
CEA-2006 Power Rating 75W x 4 @ 4Ω ≤1.0% THD+N |
| Number of Channels: | 4 |
| Rated Power (RMS Continuous Power): |
75 Watts x 4 @ 4-Ohm 150 Watts x 4 @ 2-Ohm 300 Watts x 2 @ 4-Ohm Bridged |
| Total Power (Sum of Rated Power): |
600 Watts |
| Dynamic Power (PVC/PowerCube®): |
129 Watts x 4 @ 4-Ohms 0° Res 211 Watts x 4 @ 2-Ohms 0° Res |
| Bridgeable: | Yes |
| Frequency Response: | 20Hz to 20kHz +/- 1.0dB |
| Efficiency (average): | 68% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise): | 4-Ohm: <1.0% 2-Ohm: <1.0% |
| Signal-to-Noise (CEA): | >85 dB |
| Signal-to-Noise (CEA): | >85 dB |
| Channel Separation: | >50 dB |
| Common Mode Rejection: | >55 dB |
| Damping Factor: | >500 |
| Crossover Controls: | Front/Rear High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth Front/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth All-Pass: Yes |
| Tone Controls: | Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz Function depends upon LP/AP/HP switch position |
| Input Sensitivity: | 150 mV - 12 V |
| Signal Input: | Hi/Low level: 2 RCA pair |
| Signal Output: | Low level: 1 RCA pair |
| Power Input Connector: | Captive C-Clamp |
| Power Wire Gauge: | 4 AWG |
| Speaker Output Connector: | Captive C-Clamp |
| Speaker Wire Gauge: | 8 AWG to 18 AWG |
| Heat Sink Type: | Cast aluminum |
| Cooling: | Convection |
| Remote Controls: | Optional Punch Level Control (PLC2) Ready |
| Visual Indicators: | Power/Protect/Thermal LED Input Clip LED3 Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD 2VIOLET: 1% THD 3RED: 10%+ THD |
| Circuit Topology Class: | Class A/B |
| Operating Voltage: | 9 - 16 VDC |
| Recommended Fuse (not included): |
100 A |
| Max. Current Draw (13.8V Sinewave): | 90 A |
| Average Current Draw (13.8V Music): | 45 A |
| Suggested Alternator: | 75 A |
| Shipping Weight: | 12.8 Lbs. (5.80 Kg.) |
| Dimensions (H x W x D): | 2.38 x 7.76 x 13.28 (in) 6.05 x 19.71 x 33.73 (cm) |
| Dimensional Diagram: |  |
